SVP PUR19-11-1344 Procurement of Cast Trimmer, etc. for Dept. of Otorhinolaryngology

LOT Supply, Delivery, Testing and Commissioning:
1 pc. CAST TRIMMER, brand new Php 14,500.00
A device with a sand grind disc for reducing and shaping stone or cast models
With the following Features:
1. The main unit
a. Should be made of metal and hard plastic
b. Houses the replaceable sand grind disc
c. Houses the motor unit with a speed of at least 2,800 rpm
d. Has an on and off switch or power button
e. No speed variability
f. Dimensions should be 350 x 370 x 470mm (HxWxL) +/- 10mm
g. Gross weight should not be more than 20kg.
2. Sand grind disc
a. Should be compatible with the main unit and replaceable
1 pc. SAND GRIND DISC, brand new 3,000.00
Should be compatible with the main unit
2 pcs. SUCTION MACHINE, Portable, brand new 4,500.00
Main Unit:
a. Variable pressure control ranging from 0 to at least 760mmHg
b. Should have a weight less than 5kg.
c. Dimension should not be larger than 40 x 40 x 40cm (LxWxD)
d. Power source AC 220V, 60Hz, 1.5A
e. Casing made of hard plastic
2. Liquid holder made of plastic, able to carry 1L
3. Silicon connecting tube
4. Filter - 3 pcs.
1 pc. BENCH GRINDER, brand new 3,000.00
Table top equipment with attached abrasive wheels used to polish denture and
other prosthesis, with the following features:
1. Casing is made of metal
2. Motor is 1/4 horsepower with a speed of at least 3,600 RPM
3. Has 2 attached abrasive wheels measuring 6 inches in diameter
4. Has an on and off switch
5. Voltage at 220V AC
1 pc. MICROMOTOR DRILL WITH HANDPIECE, brand new 15,000.00
An electric micromotor drill that can be attached to a handpiece appropriate for
performing prosthesis work. With the following features:
1. The main unit:
1.1. Has a control panel with a casing made of hard plastic
1.2. Non-detachable micromotor attached to the control panel via a cord cable
a. The main unit should have a power switch, hand and foot control, auto-cruise
control, speed control dial and digital speed indicator
b. The motor speed should have variable control ranging from 0 to 35,000 RPM
with forward and reverse motion
c. Power source of AV 220V
d. Dimensions should not exceed 170mm (W) x 170mm (D) x 100mm (H)
e. Weight should be less than 1.5kg.
2. Straight surgical handpiece should have the following features:
a. Should be compatible with the main unit
b. Should have a net weight of 500 +/- 50g
c. Should have a total length of 11cm +/- 1cm
d. Maximum speed at least 35,000 rpm
e. Should have a locking mechanism when the burr is placed in
f. Gear ratio of 1:1 direct drive
3. Contra-angle surgical handpiece should have the following features:
a. Should be compatible with the main unit
b. Should have a net weight of 100g +/- 50g
c. Should have a total length of 9cm +/- 1cm
d. Maximum speed at least 30,000 rpm
e. Should have a locking mechanism when the burr is placed in
set DENTAL BURR, brand new
Cutting instruments of various shape and material, attached to a handpiece and used
for shaping prosthetic material. All of the following must be compatible with the
micromotor drill and handpiece
5 pcs. 1. Carbide round cutting burr #12, for contra angle handpiece 75.00
5 pcs. 2. Carbide round cutting burr #37, for contra angle handpiece 75.00
5 pcs. 3. Carbide round cutting burr #38, for contra angle handpiece 75.00
5 pcs. 4. Carbide round cutting burr #39, for contra angle handpiece 75.00
5 pcs. 5. Carbide round cutting burr #559, for contra angle handpiece 75.00
5 pcs. 6. Mounted stone, green stone #20, for straight handpiece 20.00
5 pcs. 7. Mounted stone, green stone #59, for straight handpiece 20.00
5 pcs. 8. Mounted stone, white stone #20, for straight handpiece 20.00
5 pcs. 9. Mounted stone, white stone #11, for straight handpiece 20.00
5 pcs. 10. Mounted stone, white stone #59, for straight handpiece 20.00
5 pcs. 11. Mounted stone, red stone #59, for straight handpiece 20.00
5 pcs. 12. Mounted stone, red stone #20 for straight handpiece 20.00
5 pcs. 13. Mounted stone, red stone #42, for straight handpiece 20.00
5 pcs. 14. Mounted stone, pink stone #59 for straight handpiece 20.00
5 pcs. 15. Mounted stone, pink stone #20 for straight handpiece 20.00
5 pcs. 16. Carbide acrylic bullet-shaped tapered cutting burr for 500.00
straight handpiece, cross cut
5 pcs. 17. Carbide acrylic long tapering cutting burr for 500.00
straight handpiece, cross cut
TOTAL APPROVED LOT PRICE ……………. P 52,375.00