Supply of Various Laboratory Equipment for “Phil – Diamond Project 1: Biomarkers of Immune Dysfunction in HIV – Associated Metabolic and Neurocognitive Complication (Remaining Items)

Supply of Laboratory Equipment for “Phil – Diamond Project 1: Biomarkers of Immune Dysfunction in HIV – Associated Metabolic and Neurocognitive Complication

• CO2 incubator, 150L (5.3 cu. ft.), Ambient temperature range includes +3degC to 55degC, electropolished stainless steel, integrated water reservoir, rapid humidity recovery and complete sensors
Specifications:
- Digital controls and display of time and temperature, touch screen control, door mounted, choice of language, visual monitor alarm, culture environment visible on-screen log and usage recording
- Thermal conductivity Sensor with gas sensor technology, Electropolished Stainless Steel, CO2 Concentration Range 0 to 20%, Integrated water reservoir, 230 V, 50/60 Hz, Two O2 control ranges precisely control oxygen
concentration, Water level alarm with audible and visual alerts
- Advanced internal temperature sensing probe for outstanding temperature accuracy and control
- Precise temperature control with PID circuit
- Temperature calibration enables to offset the temperature to desired value
- Timer allows the user to accurately monitor the heating time
- Wide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfecting
- Powder-coated steel body construction ensures durability
- Built-in over-temperature protection device warrants sample and user safety
Temperature deviation adjustment
Included items:
- One CO2 gas regulator
- Digital dry bath/block heater: Interchangeable blocks: block for 28 x 1.5ml tubes, 40 x 0.5ml tubes, 1 x 96 well 0.2ml non skirted PCR plate, 1 x 96 well 0.2ml half or full skirted PCR plate block
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. Provide regular quarterly preventive maintenance and calibration during the warranty period.
8. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
9. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
10. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
11. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
12. Provide operator’s and service manual (in English Language) upon delivery.
13. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
14. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
15. Bid price should be inclusive of all applicable taxes.

• Cell culture aspirator, 0-600mbar, 1-15mL/S, 100-240VAC, 50/60Hz (with adaptors and vacuum pump)
Specifications:
- Vacuum power can be set to different levels to achieve 1mL/S to 15mL/ S aspiration speed
- Sensitive level sensor to prevent liquid overflow during operation
- Fully autoclavable waste collection bottle, tubing and handle
- Lid, tubing and handle are easy for disassembling, cleaning and autoclaving
- Wide range of adapters to fit tube, microplate and disk plate for various tasks
- Interchangeable hand operator -tip adapters make it suitable for various tasks from single channel to 8-channel based on the applications in tube, micro plate, disk plate etc.
- Vacuum range 0-600mbar
- Aspirating speed 1-15mL/S
- Autoclave Component tube; waste bottle; operation handle
- Input voltage 100-240VAC, 50/60 Hz
- Bottle Volume 4L
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. Provide regular quarterly preventive maintenance and calibration during the warranty period.
8. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
9. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
10. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
11. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
12. Provide operator’s and service manual (in English Language) upon delivery.
13. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
14. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
15. Bid price should be inclusive of all applicable taxes.

• Cold block, 24 x 1.5/20ml
Specifications:
- Maintains 0°C for up to 4 hours
- Also for use as a PCR workstation
- Two sides, ideal for: 1.5 & 2.0ml microtubes, 0.2ml PCR tubes & strips, 96 well PCR plates
- Place in a freezer overnight and it’s ready for use
- Temperature: 0°C for up to 4 hours
- Side 1 capacity: 36 x 1.5/2.0ml tubes
- Side 2 capacity: 96 x 0.2ml tubes, 12 x 0.2ml strips, 1 x 96 well PCR plate, 10 x 1.5/2.0ml
- freeze overnight and ready to use
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Provide operator’s and service manual (in English Language) upon delivery.
9. Bid price should be inclusive of all applicable taxes.

• Double balance, two-pan balance design, max. cap. 2,000g, pan size 6.2in
Specifications:
- All-metal base and beam, stainless steel pan
- Weight set (2000g model, accessory sold separately), built-in sliding masses, magnetic damping, self-aligning beam design and floating agate bearings, counterbalancing knob for quick zeroing, hardened steel edges
- Maximum Capacity 2,000 g
- Readability 0.1 g
- Pan Size 6.2 in (152 mm)
- 2 Beams
- Linearity ± 0.1 g
- Net Weight 2.2 kg
- Pan Construction Stainless Steel
- No Power Required
- Maximum Capacity 2,000 g
- Readability 0.1 g
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. Provide regular quarterly preventive maintenance and calibration during the warranty period.
8. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
9. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
10. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
11. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
12. Provide operator’s and service manual (in English Language) upon delivery.
13. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
15. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
16. Bid price should be inclusive of all applicable taxes.

• Micropipettors (1 set of 4), mannual single channel pipettes (2ul, 20ul, 200ul, 1000ul)
Specifications:
- 4 lite touch system technology manual single channel pipettes (2ul, 20ul, 200ul, 1000ul)
- 1 stand, 4 boxes of corresponding tips
- Light weight, light plunger forces and low tip ejection forces
- Light springs and 0.6 Newtons of force required for tip ejection
- Thin sealing ring near the top of the tip
- positive stop inside the tip
- contoured finger-hooks, lighter springs and low-drag seals
- Corrosion-resistant plastic tip ejectors made of PVDF polymer
- liquid end autoclavable
- Seal: cylindrical-shaped end of shaft moves through a sealing ring at the top of the pipette tip
- Stop: downward motion stops at an inner shelf molded into each tip
- Smooth and responsive plunger
- Tips and new push-rod design for accuracy and precision, consistent pickup and dispensing
- On-board RFID provides ease of service and calibration tracking.
- Asset management and maintenance schedules for your pipetting inventory
- 200 uL pipettor: Accuracy ± (%) (µl): 2.5 % 0.5 µL; 0.8 % 0.8 µL; 0.8 % 1.6 µL; Precision ±
(%) (µl): 1.2 % 0.24 µL; 0.25 % 0.25 µL; 0.3 % ; 0.6 µL
- 1000 uL pipettor: Accuracy ± (%) (µl): 3 % 3 µL; 0.8 % 4 µL; 0.8 % 8 µL; Precision ± (%)
(µl): 0.6 % 0.6 µL; 0.2 % 1 µL; 0.15 % ; 1.5 µL
- 20 uL pipettor: Accuracy ± (%) (µl): 7.5 % 0.15 µL; 1.5 % 0.15 µL; 1 % 0.2 µL; Precision ±
(%) (µl): 2 % 0.04 µL; 0.5 % 0.05 µL; 0.3 % ; 0.06 µL
- 2 uL pipettor: Accuracy ± (%) (µl): 7.5 % 0.15 µL; 1.5 % 0.15 µL; 1 % .2 µL; Precision ±
(%) (µl): 2 % 0.04 µL; 0.5 % 0.05 µL; 0.3 % ; 0.06 µL
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
9. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
10. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
11. Provide operator’s and service manual (in English Language) upon delivery.
12. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
13. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
14. Bid price should be inclusive of all applicable taxes.

• Multi-channel pipettors (0.5-10ul; 2-20ul; 20-300ul)
- 8 channels
- Smooth and responsive plunger for total control.
- lite touch technology tips and new push-rod design for accuracy and precision, consistent pickup and dispensing
- Light weight, light plunger forces and low tip ejection forces
- light springs and 0.6 Newtons of force required for tip ejection
- thin sealing ring near the top of the tip
- positive stop inside the tip
- contoured finger-hooks, lighter springs and low-drag seals
- Corrosion-resistant plastic tip ejectors made of PVDF polymer
- liquid end autoclavable
- Seal: cylindrical-shaped end of shaft moves through a sealing ring at the top of the pipette tip
- Stop: downward motion stops at an inner shelf molded into each tip
- Smooth and responsive plunger
- Tips and new push-rod design for accuracy and precision, consistent pickup and dispensing
- On-board RFID provides ease of service and calibration tracking.
- Asset management and maintenance schedules for your pipetting inventory.
- 10 uL multichannel pipettor: Accuracy ± (%) (µl): 4 % 0.04 µL; 1.5 % 0.075 µL; 1 % 0.1
µL; Precision ± (%) (µl): 5 % 0.05 µL; 1.5 % 0.075 µL; 0.5 % ; 0.05 µL
- 20 ul multichannel pipettor: Accuracy ± (%) (µl): 7.5 % 0.15 µL; 1.5 % 0.15 µL; 1 % 0.2 µL;
Precision ± (%) (µl): 4 % 0.08 µL; 1.5 % 0.15 µL; 0.5 % ; 0.1 µL
- 300 uL multichannel pipettor: Accuracy ± (%) (µl): 2.5 % 0.75 µL; 0.8 % 1.2 µL; 0.8 % 2.4
µL; Precision ± (%) (µl): 1.5 % 0.45 µL; 0.3 % 0.45 µL; 0.25 % ; 0.75 µL
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
9. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
10. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
11. Provide operator’s and service manual (in English Language) upon delivery.
12. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
13. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
14. Bid price should be inclusive of all applicable taxes.

• Pipette assist, 25mL<5s (6shift), 0.45um hydrophobic
Specifications:
- Compatible with most of the plastic and glass pipettes from 0.1 -100mL
- Six speeds of selection for aspiration and dispensing different liquids
- Large LCD display showing low battery warning and speed settings
- Enables single-handed operation with minimum effort
- Light and ergonomic design providing easy usability
- High-capacity Li-ion battery enable long runtime of operation
- Powerful pump fills a 25mL pipette in<5 seconds
- Rechargeable during use
- Aspiration Speed 25mL<5s (6 shift)
- Dispensing Speed Motor (6 shift)/Gravity
- Battery Service Life More than 8 Hours of Intermittence Use
- Charging Time 2-3 Hours
- Pipette Types Glass or Plastic Pipette (0.1-100mL), Pasteur Pipettes
- Filter 0.45μm Hydrophobic
- Weight less than or equal to 200g
Terms and conditions:
3. Indicate brand, model and country of origin.
4. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
15. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
16. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
17. Warranty should be at least 1 yr for service and on parts.
18. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
19. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
20. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
21. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
22. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
23. Provide operator’s and service manual (in English Language) upon delivery.
24. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
25. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
26. Bid price should be inclusive of all applicable taxes.

• Precision balance, top-loading balance, 6200g x 0.1g
Specifications:
- Illuminated display provides comfortable display visibility in all settings
- Windows Direct Communication Function Only a cable is needed to send weighing data to a computer
- Battery operation
- Capacity: 6200 g
- Minimum display: 0.1 g
- Repeatability: 0.1 g
- Linearity: ±0.2 g
- Temp coef sensitivity: ±5 ppm/°C (10°C to 30°C)
- Pan size: 160 mm dia
- Electrical: 12V, 1A or 6 AA batteries
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
9. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
10. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
11. Provide operator’s and service manual (in English Language) upon delivery.
12. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
13. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
14. Bid price should be inclusive of all applicable taxes.

• Refrigerator w/ freezer (-20C) with UPS/AVR
Specifications:
- High-precision microprocessor temperature control with digital LED display
- Digital display shows the ref/freezer status and alarm code (2 displays)
- Triple Channel sensors for cooling control, temperature display and ambient temp
- Reliable compressor and fan, ensure fast cooling, energy-saving and long running
- Environment friendly refrigerant CFC-free and HFCF-free
- Superior engineered frame for maximum rigidity
- Self-closing door with magnetic closure with door lock
- 50mm (Ref) and 100mm (Freezer) thickness non-CFC insulation, energy saving
- Low noise design
- Caster and level feet are easy for moving and lock
- Refrigerator compartment has adjustable shelves and one drawer, freezer compartment has fixed shelves integrated with evaporator and ABS drawers
- Capacity: 188L Ref / 100L Freezer
- Temperature range: 2-8°C Ref / -10 to -40°C Freezer
- Refrigeration type: Forced Air cooling Ref/Direct cooling Freezer
- Refrigerant: CFC-free
- Defrost: Auto Ref / Manual Freezer
- Door: Double layer glass door (Ref) / Solid door (Freezer)
- Exterior material: Powder coated steel exterior
- Alarms: High/Low temperature alarm, Remote alarm, Power failure alarm, Sensor error alarm,
- Low battery alarm, High ambient temperature alarm, USB failure alarm
- Noise: 42 dBa
- Shelves/Drawers: 3/1 Ref / 2/3 Freezer
- Power: 220V, 50/60Hz, 600W
- Standard accessories: Door lock and keys, casters, levelling feet, test hole, USB interface Inclusive item 1-1.5kVA UPS
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
9. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
10. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
11. Provide operator’s and service manual (in English Language) upon delivery.
12. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
13. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
14. Bid price should be inclusive of all applicable taxes.

• Software analysis for flow cytometry data with Dongle
Specifications:
- AutoSpill compensation: AutoSpill algorithm for calculating spillover and producing a compensation matrix developed and incorporated
- AutoSpread algorithm provides a Spillover Spreading Matrix (SSM) by calculating spillover spreading coefficients with linear models, removing the need for well-defined positive and negative populations in single-color controls
- Analyzing whole experiments encompassing many related samples
- Has gating and statistics, specialized analysis platforms for assays involving DNA/Cell Cycle, Kinetics, and Proliferation, backgating analysis, batch operations, compensation, derived parameters, has experiment, workspace and groups interface, FCS scan tool, gating hierarchy, statistics and formula
- Allows for generation of statistics, graphs, tables, web pages, and even movies, integrates remote data hosting services (LIMS) and supports “cloud” deployment for excellent scaling of performance in a demanding, high-throughput environment
- allows 3D Data Visualization, Boolean Gates, Cell Cycle Analysis, Compensation, Derived Parameters: calculate a ratio of two parameters, add a time parameter or convert between log and linear scaling, Movies to view data dynamically,Plate Editor
- save FCS files and workspace as an Archival Cytometry Standard container which compresses all files into s single file similar to a compressed .zip file, automate your repeated analyses, by creating a template which contains the groups, gates, and statistics without the associated FCS files for re-use, template can be referenced in command line, which is the way to use FlowJo without human intervention, facilitates for keyword extraction and grouping as well as the ability to automate analysis gestures, offer some free utilities which de-identify FCS files and allow you to create FCS files from spreadsheet data
- available plug ins: tSNE and others
- Can be used at multiple workstations (one at a time)
- internet connection not needed Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
9. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
10. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
11. Provide operator’s and service manual (in English Language) upon delivery.
12. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
13. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
14. Bid price should be inclusive of all applicable taxes.

• Waterbath, digital, 12L ambient +5 to 95degC, includes base tray
- Ambient +5°C to 95°C
- Unique Set and Forget® technology – fast heat-up, reliable temperature control
- Stability ±0.5°C
- Simple, intuitive controls – quick and easy to set temperature
- Practical front panel lock – disables front panel controls preventing unintentional temperature changes
Terms and conditions:
1. Indicate brand, model and country of origin.
2. Notarized certificate that the product is brand new, not reconditioned/refurbished including parts and accessories.
3. Delivery and installation should be done within 60-90 days commencing on the date of acceptance of Notice to Proceed. Notification by email and acknowledged by the supplier constitutes date of acceptance. The equipment must be delivered ready to use. Cables, connectors, adapters and accessories even not specified but are essential for the unit to function must be provided free by the winning bidder.
4. Undertaking to provide product orientation and operations training for end-user and troubleshooting training for technicians/research staff within seven (7) days after complete installation.
5. Warranty should be at least 1 yr for service and on parts.
6. Warranty period shall commence from the date of acceptance by the end-user, testing and commissioning.
7. A notarized certification from the manufacturer that the bidder is an authorized distributor of the equipment.
8. Notarized Certification from the manufacturer and local distributor that in the event of a change of local distributor, preventive maintenance, warranty and services agreed here upon will be honored by the principal manufacturer.
9. Guarantee letter or certificate from the manufacturer and local distributor to ensure the availability of parts, supplies and accessories and will not be discontinued for the next five (5) years.
10. Provide separate quotation for consumables and maintenance/repair/replacement of parts after warranty period.
11. Provide operator’s and service manual (in English Language) upon delivery.
12. The bidder must submit certification that they have a capability for corrective and preventive maintenance of the unit or have a service center within Metro Manila
13. The winning bidder will be responsible of all fees for performance testing, delivery, installation and commissioning the unit.
14. Bid price should be inclusive of all applicable taxes. Brand being offered.